CSC230 Project 1 solved

Original price was: $35.00.Current price is: $30.00.



5/5 - (3 votes)

Part 0 : Registering with NCSU GitHub
Using a web browser, visit and log in with your unity credentials. If you’re not able to
log in on this website, inform the instructor immediately (i.e., before the deadline).
We’ll be using NCSU’s GitHub for submitting future assignments. This is an opt-in system, which
means that the initial login is required so that you are recognized as a user. If you are not in the
system, we won’t be able to create the repositories that you will be using for the rest of the course,
and you won’t be able to complete future assignments.
Maybe you’ve used git and github before. That’s great, but keep in mind that you’ll need to use your
assigned repo, hosted on NC State’s GitHub for future projects.
You’ll get your 10 points just for logging in on the NCSU github. This is a really easy 10 points to earn.
There is nothing to turn in for this part of the assignment. If you run into trouble logging in, be sure
to let us know before the deadline, so we can try to help you out.
Part 1 : Correcting Style (25 pts)
The program, style.c is badly formatted. It has everything, bad or missing comments, bad curly
bracket placement, some hard tabs for indentation, some bad line termination, no line termination at
the end of the last line, maybe more problems. Edit this program to make it consistent with the class
style guidelines.
If you’d like, you can use an IDE or some other tool to help you format the source code. If you have
trouble removing the windows-style line termination, you might want to try the dos2unix command
installed on the common platform systems. For invisible parts of the source file (like spaces or line
termination), you might want to out the hexdump program. If you run it like the following, it will show
the sequence of characters in the source file, in hexadecimal on the left and as symbols on the right
where possible:
$ hexdump -C style.c
When your program runs (even before you correct the style), it should exit with a successful exit
status and produce output like the following. The starter also includes a expected-s.txt file you can
use to make sure your style-corrected program produces exactly the output we’re expecting (a
randomly-generated paragraph of text).
wlrb mqbhcd r owkk hiddqsc xrjm wfr sjyb dbef arcbynecd ggx pklore
nmpa qfwkho kmcoqhnw kuewhsqmgb uqcljj vsw dkqtbxi mvtrrbljpt snfwzqfj
fadrrwsof b nuvqhff saqxwpqcac hchzv rkmlno jkpqpx jxkitzyx cbhhkic
oendtomfg wdwf gpxiq kuytdlcgde htaciohor tq vwcsgspqo msb agu nny
nz gd wpbtr blnsade guumoqc rubetoky hoachwdvmx rdryxl n qtukwa mleju
wci xubume meya drmydiajxl ghiqfmz lvihjo vsuyoyp yul eim otehzri c
kpggkbb p zrzu xamludf kgruowz i oobpple lwphapjna qhdcnvwdtx bmyppp
uxnspusgd iixqmbfjxj v djsuyib ebmws q oygyxym evypzvje ebeocfu
sxdixtigsi ehkch dflilrjq nxzt rsvbspkyh enbppkqtp dbuotbbqcw vrf ju jd
CSC230 Project 1 – 3/12/18, 7)01 PM Page 3 of 10
tg iqvdg ijvwcya bwewpjvyg hljxepb iwuqzdzu du zv fspqp wuz f ovydd
Words: 103
After reformatting the program, add the required block comments at the start of the source file and
before each function. You may need to read the code for each function so your comments can
summarize what they each do and so you can choose meaningful named constants, instead of magic
For this part of the assignment, you’ll be submitting your modified source file, style.c, to the Project
1 submission locker on WolfWare classic. Your submission will be graded according to the following:
Correcting source code formatting: 10 points
Adding the required block comments: 10 points
Program still compiles cleanly and produces the right output: 5 points
Part 2 : Text Box (25 pts)
Have a look at the textbox.c source file. This program is intended to give you a chance to try reading
input character-by-character using getchar() and printing characters using putchar(). The overall
skeleton of this program is done for you, but you’ll need to fill in the bodies of the functions to get it
The job of this program is to print text from standard input, but with a border around the text. The
figure below shows how it’s supposed to work.
Figure: job of the textbox.c program, wrapping a border around input text.
The border drawn around the text is a fixed-width, and made from a chosen character. It should be
tall enough to contain every line read from standard input. Both the box width and the character it’s
made of are specified via preprocessor constants, so it would be easy to change them and then recompile the program. We’ll use a border that’s made of asterisks and contains lines of 60 characters
(so, a lot wider than the figure above shows). This width value is the length of each line of text inside
the border. With a border character at the start and end of each output line, these will actually be two
characters longer. So, by default, output lines will all be 62 characters, with 60 characters in between
he first and last character of the border.
Input lines may not all be exactly the right length (probably, they won’t be). So, as you’re printing,
you’ll have to pad with spaces on the right for lines that are too short. For lines that are too long,
you’ll discard extra characters on the right, printing as many as you can and reading (and ignoring)
everything else up to the end of the line.
Design and Implementation
CSC230 Project 1 Page 4 of 10
Your program will define and use the following three functions. You can have more if you want, but
we’ll be looking for at least these three.
void lineOfChars( char ch, int count )
This function prints out multiple copies of the given character, followed by a newline. The number
of copies is determined by the count parameter. Use this function to help print the top and
bottom border around the text.
bool paddedLine()
This function will read and print a single line of text inside the border. If there’s no line of text to
print (i.e., it hits EOF before it can read any characters), it will return false to tell the caller that
there’s no more text to put in the box. This function will read the text from standard input and
print to standard output. If the line of text isn’t long enough, it will add extra spaces at the end
to make the box rectangular. If a line of text is too long, it will discard extra characters on the
line (i.e., up to the end-of-line) to keep the box rectangular.
This function is probably the most fun/tricky part of this assignment. The test cases provided
with the starter will help you try out your function’s behavior and make sure it’s doing the right
thing in all situations. When printing out a line in the middle part of the text box, you can either
make main() responsible for printing the border characters at the start and the end, or you can
make this function handle it, whichever seems easier to you.
int main()
This is, of course, the starting point of your program. It will use the other two functions to print
the text from standard input with a border around it.
Be sure to fill in the empty block comments in this program according to the style guide. Remember, a
file comment has a short summary of the file/program, along with a file and an author tag. A block
comment on a function needs a short summary of what the function does, along with param tags for
any parameters the function takes, and return tag if it’s not a void function.
Compile your program using the following command.
$ gcc -Wall -std=c99 textbox.c -o textbox
You can run the program and type input to it yourself, but the output will look a lot better if you use
redirection to read input from a file. If you just want to see what your program’s output looks like,
you can run it like:
$ ./textbox < input-t1.txt
If you really want to make sure your output is right, you can capture the output in file and compare it
against one of our expected output examples. Try running your program as follows to tell it to read
input from our first test case (input-t1.txt) and send output to a file named output.txt. Then, check
your programs exit status to make sure it reported successful execution, and use diff to help make
sure it produced output that matches what we were expecting.
$ ./textbox < input-t1.txt >| output.txt
$ echo $?
CSC230 Project 1 Page 5 of 10
$ diff output.txt expected-t1.txt
You can use similar commands to test your program against each of the four test cases we’re
providing. Here’s what they each do:
1. This test input contains five lines, each one 60 characters long, exactly long enough to fill a line
of the box. It should be easy.
2. This test has lines that are all shorter than the box width, so they’ll all have to be padded with
extra spaces at the end to make the box the right width.
3. This test has some lines that are too long, so the extra characters at the end will have to be
discarded as the line is processed.
4. This test contains a few lines of text, some that have to be padded with spaces and some (one)
that has to be truncated.
Remember, you need check the exit status right after you run your program. If you get an exit status
of zero and diff doesn’t report any differences between the expected output and the actual output you
got, then it looks like your program is behaving correctly. If diff notices any differences, it will report
the line number where there’s a discrepancy, along with the contents of the lines that don’t match. If
you have trouble interpreting the output of diff, you can try out the sdiff command. This works like
diff, but it will display the expected and actual output files side by side, and may make it easier to see
inconsistencies between the files. To use sdiff, just replace diff with sdiff in the shell code above.
For this part of the assignment, you’ll be submitting your modified source file, textbox.c to the
Project 1 submission locker on WolfWare classic. Your edits to textbox.c will be graded according to
the following:
Compiling cleanly: 5 points
Producing the right output during execution: 15 points
Follwing the style guidelines: 5 points
This includes commenting, consistent indentation (you can change the indentation from the
starter code, if you want), curly bracket placement, etc.
Following the design Up to 20 percent deduction
This includes implementing and using the functions described above and preprocessor constants,
no global variables.
Late submission 20 percent deduction
Part 3 : Ballistics Table Generator (25 pts)
One of the first jobs we came up for computers was calculating ballistics tables, charts that tell you
where a projectile could be expected to land if you launch it under particular circumstances. We’ve
come up with lots of varied (and peaceful) things to do with computers since then, but it can still be
interesting to think about these problems from the early days of computing. That’s what you’re going
to do for this program.
The following figure shows an ideal path of a projectile. On a flat surface, if there’s no air resistance, it
follows a parabolic path that depends on how fast it’s going when it leaves the point of origin, v0, and
at what angle, a.
CSC230 Project 1 Page 6 of 10
Figure: ideal, parabolic path of a projectile.
Specifically, the height of an idealized projectile at t seconds after launch will be determined by the
following formula, where v0 is its initial speed in m/s, a is the angle at which it begins traveling
(measured from the ground), and g is gravitational acceleration (use 9.81 m/s2).
v0 t sin( a ) – g t2 / 2.0
Horizontally, the projectile travels until it hits the ground. So, after t seconds of flight, the following
formula tells the distance, d, it has traveled from its point of origin.
v0 t cos( a )
Your ballistics.c program will prompt the user for a double value representing the initial projectile
velocity. Use the following prompt (there’s a space after the colon).
After the user types in a value and presses enter, your program should print a blank line. This extra
line is to make the output look OK when it’s sent to a file. Then, print a table like the following (this
one’s for an initial velocity of 10):
angle | v0 | time | distance
0 | 10.000 | 0.000 | 0.000
5 | 10.000 | 0.178 | 1.770
10 | 10.000 | 0.354 | 3.486
15 | 10.000 | 0.528 | 5.097
20 | 10.000 | 0.697 | 6.552
25 | 10.000 | 0.862 | 7.809
30 | 10.000 | 1.019 | 8.828
35 | 10.000 | 1.169 | 9.579
40 | 10.000 | 1.310 | 10.039
45 | 10.000 | 1.442 | 10.194
50 | 10.000 | 1.562 | 10.039
55 | 10.000 | 1.670 | 9.579
60 | 10.000 | 1.766 | 8.828
65 | 10.000 | 1.848 | 7.809
CSC230 Project 1 Page 7 of 10
70 | 10.000 | 1.916 | 6.552
75 | 10.000 | 1.969 | 5.097
80 | 10.000 | 2.008 | 3.486
85 | 10.000 | 2.031 | 1.770
90 | 10.000 | 2.039 | 0.000
This table has four columns, with a header at the top. Columns are separated by a vertical bar, with a
space on either side of every bar. Values in the table are printed in a 10-character field, with the value
rounded to three fractional digits for real-valued fields. The first column samples different values for
the angle, a, every five degrees from 0 to 90 degrees. The second column gives the initial velocity,
entered by the users. The third column reports the number of seconds the projectile is in the air, and
the last column reports the distance, d it travels from its point of origin.
How are you going to generate this table? Well, the first two columns are easy. The initial velocity is
given by the user, and the angle is sampled every five degrees. For the flight time, you just have to
figure out when the height of the projectile gets back down to zero; that’s when it hits the ground.
Look at the formula for the projectile height given above, and solve for the value of t that yields a
height of zero. This gives you a quadratic equation, so solving it would be a good a good application
for the quadratic formula. In fact, this quadratic equation is so simple, there are definitely some
opportunities to simplify your solution.
You can assume the initial velocity given by the user is a non-negative real number. You don’t have to
error-check this input. There will be plenty of opportunities for that kind of thing on future projects.
Design and Implementation
The starter contains a partial implementation for the ballistics.c program. You get to fill in the
functions and create meaningful named constants to make the program easy to understand and
modify. You’ll define and use the following three functions. You can have more if you want.
double flightTime( int angle, double v0 )
Given the angle in degrees that a projectile leaves the ground and its initial velocity, this function
should return the time the projectile is in the air.
void tableRow( int angle, double v0, double t )
This function prints out a row of the table, given the angle and initial velocity (like the previous
function) and the flight time (the output from the previous function), it should print a row of the
table reporting these three values, along with the distance the projectile travels.
int main()
This is the starting point for running your program. It will read input from the user, print the
table header, then use the other two functions to print the rest of the table.
Be sure to fill in the block comments for the source file and the functions you get to write. For
preprocessor constants you define, be sure to give a short Javadoc-style comment that says what
they’re for.
For this problem, we’ll need to use some parts of the math library, for calculating the sine and cosine
of the launch angle, a and for the square root calculation, if you need it. The functions you need are
declared in the math.h header; the partial implementation from the starter already includes it for you.
CSC230 Project 1 – 3/12/18, 7)01 PM Page 8 of 10
You’ll also need to link with the math library. The compiler option for this is given below.
The C functions for sine, cosine and square root are a lot like the static methods in the Java Math
class. Here’s how they work:
double sin( double a )
This function returns the sine of the angle, a, given in radians.
double cos( double a )
This function returns the cosine of the angle, a, given in radians.
double sqrt( double v )
This function returns the (non-negative) square root of the given (non-negative) value, v.
Notice that the sin() and cos() functions expect an angle in radians, but, elsewhere, angles are
described in degrees. So, you’ll have to convert. For this, you’ll probably want to use the preprocessor
constant M_PI (the mathematical constant PI). This value is commonly defined in the math.h header,
but it’s not actually part of the C99 standard. There’s an option for defining it anyway, given below in
the compile instructions.
This program may use the M_PI constant and it will probably need functions from the math library.
You can use the -D_GNU_SOURCE to enable the constant for PI, and the -lm flag will tell the compiler to
link with this library:
$ gcc -D_GNU_SOURCE -Wall -std=c99 ballistics.c -o ballistics -lm
This program is easy to run with input entered by the user. While you’re developing and debugging,
you may just want to type the input value yourself. Once you think it’s running correctly, you can start
comparing the output against expected output for our provided test cases. You can use commands
like the following:
$ ./ballistics < input-b1.txt >| output.txt
$ echo $?
$ diff output.txt expected-b1.txt
We’re providing four test cases to try your program with, each with an input file and an expected
output file. They provide different values for the initial velocity, including one with an initial velocity of
For this part of the assignment, you’ll be submitting your modified source file, ballistics.c to the
Project 1 submission locker on WolfWare classic. We’ll grade it using the same criteria as the
textbox.c program:
Compiling cleanly: 5 points
Producing the right output during execution: 15 points
Follwing the style guidelines: 5 points
commenting, consistent indentation, curly bracket placement, magic numbers, etc.
Following the design Up to 20 percent deduction
CSC230 Project 1 – 3/12/18, 7)01 PM Page 9 of 10
Implementing and using the exptected functions, no global variables.
Late submission 20 percent deduction
Notes on Completing the Assignment
Of course, before you submit, you’ll want to be sure both of your programs are consistent with the
CSC 230 Style Guidelines. Also, make sure they compile cleanly (no errors or warnings) on a common
platform machine using the required compiler options.
There is a 24 hour window for late submissions. After the main locker closes, submit all late work to
Project_1_Late, but remember there is an automatic 20 percent deduction for late work.
Common Problems
While developing, if a program enters an infinite loop, use Ctrl+C to stop it.
Make sure you submit source files (ending in .c), not your executable programs.
Make sure you’ve submitted all of your files using WolfWare classic. After submitting, you can go
back and check to make sure your files are all there. Emailing your program isn’t really a
Contact the teaching staff if you run into a problem submitting your work. Or, visit Piazza and see
if someone else has run into the same kind of problem.
Learning Outcomes
The syllabus lists a number of learning outcomes for this course. This assignment is intended to
support several of theses:
Write small to medium C programs having several separately-compiled modules
Explain what happens to a program during preprocessing, lexical analysis, parsing, code
generation, code optimization, linking, and execution, and identify errors that occur during each
phase. In particular, they will be able to describe the differences in this process between C and
Correctly identify error messages and warnings from the preprocessor, compiler, and linker, and
avoid them.
Find and eliminate runtime errors using a combination of logic, language understanding, trace
printout, and gdb or a similar command-line debugger.
Interpret and explain data types, conversions between data types, and the possibility of overflow
and underflow
Explain, inspect, and implement programs using structures such as enumerated types, unions,
and constants and arithmetic, logical, relational, assignment, and bitwise operators.
Trace and reason about variables and their scope in a single function, across multiple functions,
CSC230 Project 1 – 3/12/18, 7)01 PM Page 10 of 10
and across multiple modules.
Write, debug, and modify programs using library utilities, including, but not limited to assert, the
math library, the string library, random number generation, variable number of parameters,
standard I/O, and file I/O
Use simple command-line tools to design, document, debug, and maintain their programs.
Distinguish key elements of the syntax (what’s legal), semantics (what does it do), and
pragmatics (how is it used) of a programming language.