Description
Sim 3 An ALU
1 Purpose
In this project, you’ll implement an ALU. You will build three new classes:
one to implement a MUX, one to implement a 1-bit ALU element, and one to
implement the entire ALU.
1.1 Limitations
Hopefully, I’ve convinced you (in Simulation Project 2) that any sort of logical
expression can be encoded as logic gates. So to simplify the code, I’ll let you use
Java logical operators (&&, ||, ~, &, |, !) again. Likewise, you may use the
==, != operators. However, you may not use <, <=, >, >= (except in for()
loops). As before, you may use ++ in any for() loops that you write, and you
may use addition or subtraction (to figure out array indices) when copying your
carry bits from one element to the next. But you must not use addition or
subtraction anywhere else.
Just like in Simulation 2, you are not allowed to use if() anywhere – not
even in the MUX! You will need to compose your MUX using only logical
operators.
1.2 Required Filenames to Turn in
Name your files
Sim3_MUX_8by1.java
Sim3_ALUElement.java
Sim3_ALU.java
I have released a few utility classes in the project directory. If you want to use
them in your solution, you may. However, you must use those classes and only
those classes – and don’t modify them in any way! (If you turn in copies of
these, I’ll ignore them.)
2 No Testcases This Time
This time, I won’t provide any testcases besides a very basic one detailed below.
(As always, sharing testcases on Piazza is encouraged.)
The test case does not do anything interesting, and doesn’t print anything
out – it simply double-checks that you have the right input and output fields for
each of the 3 required classes.
1 Sim 3 An ALU
Use the one testcase I give you to make sure that your fields are named
correctly. Use testcases that you have written to make sure that your results
are correct!
NOTE: We will not test any input for the LESS testcase where overflow would
be an issue. So you don’t have to worry about that!
3 Tasks
Like in Simulation 2, you will be implementing Java classes to model various
logical components – and you will do it mostly by composing smaller pieces into
larger ones.
The MUX and ALU classes will each have a single execute() method, just
like in previous Simulations. But the ALU Element class will be a little different:
it will have two different methods – representing the two-pass nature of how the
ALU works.
3.1 MUX
Write a class named Sim3 MUX 8by1. It must have a 3-bit control[] input, and
an 8-bit in[] input; both are arrays of RussWire objects. It must have a single
RussWire output, which is named out (not an array).
This class must have a single execute() method.
This class models an 8-input MUX, where each input is a single bit wide.
Since it has 8 inputs, there are 3 control bits. (As with our adders, treat element
0 of the control array as the LSB of the control input.)
3.2 ALU Element
Write a class named Sim3 ALUElement. It must have several inputs:
• aluOp (3 bits)
As we normally do, element 0 is the LSB of this field. It has 5 possible
values:
– 0 – AND
– 1 – OR
– 2 – ADD
– 3 – LESS
– 4 – XOR
(You may assume that this input will never be set to 5,6,7.)
Of course, XOR is not a standard ALU operation according to the design
in the textbook – I’m adding it just for fun.
2 Sim 3 An ALU
• bInvert (1 bit)
• a,b (1 bit each)
• carryIn (1 bit)
• less (1 bit)
This input is the value that this ALU Element should give as the result if
aluOp==3. (Obviously, this input will not be set before the first pass, so
it should only be read during the second pass.)
The class must also have several outputs:
• result (1 bit)
This is the output from this ALU element. It might be the result of
calculating AND, OR, ADD, or LESS.
• addResult (1 bit)
This is the output from the adder. It should always be set – no matter
what the aluOp is set to. This is the add result for this bit only.
(If aluOp==2, then result and addResult will – eventually – be the same.)
• carryOut (1 bit)
3.2.1 ALU Element – Two Passes
The Sim3 ALUElement class must have two execute methods, named execute pass1()
and execute pass2().
execute pass1() represents (surprise!) the first pass through the ALU Element. When this is called, all of the inputs to the element will be set except
for less. Your code must run the adder (including, of course, handling the
bInvert input), and must set the addResult and carryOut outputs. It must
not set the result output yet – because, at this point in time, the value of the
less input might not be known.1
execute pass2() represents the second pass through each ALU Element.
When this function is called, all of the inputs will be valid (including less),
and you must generate the result output.
When should you generate the AND value and OR value, and when should
you copy the AND, OR, ADD values into the inputs of the MUX? You get to
choose.
1Tempted to use an if() statement, and set the result sometimes? Remember that if()
is banned!
3 Sim 3 An ALU
3.3 ALU
Write a class named Sim3 ALU, which represents a complete ALU. It must use
an array of ALU Element objects internally.
You must write this class so that it can handle inputs with any number of
bits (not just 32). We’ll pass the required size of the ALU as a parameter to
the constructor of your class; you can assume that it will be ≥ 2. (We’ll call
this value X below.)
This class must have the following inputs:
• aluOp (3 bits)
See the ALU Element description above to see how the ALU operation is
encoded.
• bNegate (1 bit)
• a,b (X bits each)
This class must have a single X bit output, named result.
This class must have a single execute() method. It must deliver the inputs
to the various ALU Elements, call execute pass1() on them, set up the less
inputs for each element, and then call execute pass2() on each. (There are
a few variations in the order in which you perform these steps. You may use
the order that makes most sense to you. But write comments to explain what
you’re doing!)
4 How to Add
As I’ve noted above, you are not allowed to use any addition or subtraction
in your classes (except for for() loops, and for copying carry bits from one
element to the next).
However, like I did with Simulation Project 2, I’ve provided utility classes: a
FullAdder, plus the smaller classes that it makes use of. I encourage you to use
this inside each ALUElement; however, if you prefer to re-implement the adder
using Java logical operators, that is also OK.
5 A Note About Grading
Your code will be tested automatically. Therefore, your code must:
• Use exactly the filenames that we specify (remember that names are case
sensitive).
• Not use any other files (unless allowed by the project spec) – since our
grading script won’t know to use them.
• Follow the spec precisely (don’t change any names, or edit the files I give
you, unless the spec says to do so).
4 Sim 3 An ALU
• (In projects that require output) match the required output exactly! Any
extra spaces, blank lines misspelled words, etc. will cause the testcase to
fail.
To make it easy to check, I have provided the grading script. I strongly
recommend that you download the grading script and all of the testcases, and
use them to test your code from the beginning. You want to detect any problems
early on!
5.1 Testcases
For assembly language programs, the testcases will be named test *.s . For
C programs, the testcases will be named test *.c . For Java programs, the
testcases will be named Test *.java . (You will only have testcases for the
languages that you have to actually write for each project, of course.)
Each testcase has a matching output file, which ends in .out; our grading
script needs to have both files available in order to test your code.
For many projects, we will have “secret testcases,” which are additional
testcases that we do not publish until after the solutions have been posted.
These may cover corner cases not covered by the basic testcase, or may simply
provide additional testing. You are encouraged to write testcases of your
own, in order to better test your code.
5.2 Automatic Testing
We have provided a testing script (in the same directory), named grade sim3.
Place this script, all of the testcase files (including their .out files if assembly
language), and your program files in the same directory. (I recommend that
you do this on Lectura, or a similar department machine. It might also work
on your Mac, but no promises!)
5.3 Writing Your Own Testcases
The grading script will grade your code based on the testcases it finds in the
current directory. Start with the testcases I provide – however, I encourage you
to write your own as well. If you write your own, simply name your testcases
using the same pattern as mine, and the grading script will pick them up.
While you normally cannot share code with friends and classmates, testcases are the exception. We encourage you to share you testcases – ideally
by posting them on Piazza. Sometimes, I may even pick your testcase up to be
part of the official set, when I do the grading!
6 Turning in Your Solution
Navigate to the folder that contains the folder Sim3. Then run the command:
turnin cs252f21-sim3 Sim3. Please turn in only your program; do not
5 Sim 3 An ALU
turn in any testcases.
You must ensure that your folder is named Sim3 and it contains files that
exactly match filenames described above in this spec.
6 Sim 3 An ALU
