Description
Introduction
The library functions and system calls that implement dynamic memory allocation operate on a
contiguous region of memory called the heap. Your task is to implement simple versions
of malloc and free called smalloc and sfree. These two functions will operate nearly the same
way as malloc and free: smalloc makes memory available (“allocates memory”) and sfree frees
that memory. One difference between free and your sfree is that sfree will return a -1 on error
and a 0 on success. (The library free call doesn’t return any value.)
Details
You are given some starter code for this assignment. You can find the starter code by checking out
your repository. It will compile, but will not operate correctly until you implement the following four
functions:
mem_init(): (5%) Initializes the data structures that manage the dynamic memory allocation.
Part of this function is given to you. A large region of memory is reserved usingmmap. The
comments above mem_init in the starter code explain how mmap is called. Using mmap in this
way means that you are free to use malloc as normal to create your linked lists. (This is the
only place in the code where mmap is used.)
void *smalloc(unsigned int size): (30%) Reserves size bytes of space from the
memory region created by mem_init. If the memory is reserved (allocated) successfully,
Returns a pointer to the reserved memory. If the memory cannot be reserved (i.e. there is no
block that is large enough to hold size bytes), returns NULL.
int sfree(void *addr): (30%) Returns memory allocated by smalloc to the list of free
blocks so that it might be reused later.
mem_clean(): (10%) Uses free (that’s the C function free, not your sfree!) to free all the
dynamically allocated memory (allocated_list and freelist) used by the program before
exiting. (The valgrind program must show all heap memory freed, otherwise you have a
memory leak. See below.)
There are three global variables that define the data structures required:
mem stores the starting address of the memory region that is reserved by mem_init.
freelist: A linked list of struct blocks that identify the portions of the memory region that
are free (not in use). Blocks in this list are stored in increasing address order.
allocated_list: A linked list of struct blocks that identify portions of memory that have
been reserved by calls to smalloc. When a block is allocated it is placed at the front of this list,
so the list is unordered.
You can think of the address returned by mem_init as the start of a large array of bytes, and it is
your job to partition it up when smalloc is called. Your program will keep track of two linked lists of
blocks (using struct block): a list of allocated blocks (allocated_list) and a list of freed blocks
(freelist). To complete mem_init, you need to create a block node with the starting address as
given by mmap. Therefore, after mem_init completes, the allocated_list will be empty (but
initialized!), and freelist will have one block in it where the address contained in that block is the
address returned by mmap.
The following diagram shows the state of memory after mem_init has been called.
When smalloc(size) is called, it searches the freelist for a block that is at least size bytes in
size. There are two possibilities for success: it might find a block of exactly the required size, or it
might find a block that is larger than the required size. If it finds a block that is larger than size bytes,
then it will split the block into two blocks. The first block, containing the address and size of the
allocated block, is placed at the beginning of the allocated_list, and the block containing the
address and size of the remaining memory stays in the freelist.
Example
Suppose we have a test program that makes the following three calls to smalloc. The state of the
lists are shown in the diagram below:
void *ptrs[3];
ptrs[0] = smalloc(16);
ptrs[1] = smalloc(24);
ptrs[2] = smalloc(32);
The next diagram shows the state of the two lists after the following call to sfree:
sfree(ptrs[1]);
Testing (15%)
(10%) In addition to writing the four functions to implement the dynamic memory system, you will
also write one test program in mytest.c that tests your functions. You may usesimpletest.c as a
guide for how to write a test, but your program must test an interesting test case. Determining what
makes an interesting case is a decision you need to make, and part of what we are marking.
Your mytest.c program must include a comment at the top of the file explaining the case that is
tested and why it is an interesting test case.
To make simpletest fully work, you will need to complete the print_list function.
(5%) Add a rule (or rules) to the Makefile to build an executable called mytest.
Add another rule to the Makefile with the target tests and the
prerequisites simpletest and mytestthat runs both test programs.
Valgrind
valgrind is a very useful tool for checking for memory errors. We will primarily use it to make sure
that there are no memory leaks in our programs. Run it as:
valgrind simpletest
The output includes the output from simpletest. The output from valgrind will be prefixed with
something that looks like “==10320== ” (The number is the process id of the simpletest process and
will change from run to run.) The information from valgrind that is most useful is near the bottom:
==10320==
==10320== HEAP SUMMARY:
==10320== in use at exit: 0 bytes in 0 blocks
==10320== total heap usage: 5 allocs, 5 frees, 120 bytes allocated
==10320==
==10320== All heap blocks were freed — no leaks are possible
==10320==
==10320== For counts of detected and suppressed errors, rerun with: -v
==10320== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 2 from 2)
The message you want to see is “All heap blocks were freed — no leaks are possible.” (The
suppressed errors are not important.)
Code Quality (10%)
Code quality is always important. Use clear variable names, consistent formatting, informative
comments, and good design. Compared to A1, there are more clear opportunities for modularization
in your code for A2.
What to submit
You will commit to your repository in the a2 directory all files required to build your program. This
includes the Makefile, all source code (.c) and header files (.h).
Make sure that you’ve done svn add on every file. Check MarkUs, or checkout your repository into
a new directory, to verify that everything is there. There’s nothing we can do if you forget to submit a
file.
You should be able to run valgrind simpletest and see the message All heap blocks were freed
— no leaks are possible.
Submission checklist:
You can make your life a lot simpler by ensuring that your submission is complete. When you first sit
down to do some work on this assignment, check out the repository. Notice which files are already in
the repository. Every time you create a new file, run svn add immediately to ensure that future
commit operations will commit the new file as well.
Use version control as it was meant to be used. Commit your work frequently — at least once every
2-3 hours that you are working on the assignment. This will prevent any last minute svn problems,
and provide a record of your work.
Here is a list of things that you should do at least an hour before the assignment deadline:
Create a temporary directory in your account (not one that is a subdirectory of your working
directory for your repository).
Check out your repository into this empty directory to be sure that the correct files have been
committed.
Run make to be sure that at least the simpletest program compiles without warnings or error.
Run simpletest and your own tests to be sure that everything works as expected.
Run valgrind simpletest to make sure that no memory is left allocated in the heap.
© 2015 Karen Reid
