Description
1 Theory
Q1.1 Theory [3 points] Prove that softmax is invariant to translation, that is
sof tmax(x) = sof tmax(x + c) ∀c ∈ R
Softmax is defined as below, for each index i in a vector x.
sof tmax(xi) = e
xi
P
j
e
xj
Often we use c = − max xi
. Why is that a good idea? (Tip: consider the range of values
that numerator will have with c = 0 and c = − max xi)
Q1.2 Theory [3 points] Softmax can be written as a three step processes, with si = e
xi
,
S =
Psi and sof tmax(xi) = 1
S
si
.
• As x ∈ R
d
, what are the properties of sof tmax(x), namely what is the range of each
element? What is the sum over all elements?
• One could say that ”softmax takes an arbitrary real valued vector x and turns it into
a ”.
• Can you see the role of each step in the multi-step process now? Explain them.
Q1.3 Theory [3 points] Show that multi-layer neural networks without a non-linear
activation function are equivalent to linear regression.
Q1.4 Theory [3 points] Given the sigmoid activation function σ(x) = 1
1+e−x , derive the
gradient of the sigmoid function and show that it can be written as a function of σ(x)
(without having access to x directly)
2
Q1.5 Theory [12 points] Given y = W x + b (or yi =
Pd
j=1 xjWij + bi), and the gradient
of some loss J with respect y, show how to get ∂J
∂W ,
∂J
∂x and ∂J
∂b . Be sure to do the derivatives
with scalars and re-form the matrix form afterwards. Here is some notional suggestions.
∂J
∂y = δ ∈ R
k×1 W ∈ R
k×d x ∈ R
d×1
b ∈ R
k×1
We won’t grade the derivative with respect to b but you should do it anyways, you will need
it later in the assignment.
Q1.6 Theory [4 points] When the neural network applies the elementwise activation
function (such as sigmoid), the gradient of the activation function scales the backpropogation
update. This is directly from the chain rule, d
dx f(g(x)) = f
0
(g(x))g
0
(x).
1. Consider the sigmoid activation function for deep neural networks. Why might it lead
to a ”vanishing gradient” problem if it is used for many layers (consider plotting Q1.4)?
2. Often it is replaced with tanh(x) = 1−e−2x
1+e−2x . What are the output ranges of both tanh
and sigmoid? Why might we prefer tanh ?
3. Why does tanh(x) have less of a vanishing gradient problem? (plotting the derivatives
helps! for reference: tanh0
(x) = 1 − tanh(x)
2
)
4. tanh is a scaled and shifted version of the sigmoid. Show how tanh(x) can be written
in terms of σ(x).
2 Implement a Fully Connected Network
When implementing the following functions, make sure you run python/run q2.py along
the way to check if your implemented functions work as expected.
2.1 Network Initialization
Q2.1.1 Theory [3 points] Why is it not a good idea to initialize a network with all zeros?
If you imagine that every layer has weights and biases, what can a zero-initialized network
output after training?
Q2.1.2 Code [3 points] In python/nn.py, implement a function to initialize neural network weights with Xavier initialization [1], where V ar[w] = 2
nin+nout
where n is the dimensionality of the vectors and you use a uniform distribution to sample random numbers
(see eq 16 in the paper).
Q2.1.3 Theory [2 points] Why do we initialize with random numbers? Why do we scale
the initialization depending on layer size (see near Fig 6 in the paper)?
2.2 Forward Propagation
The appendix (sec 8) has the math for forward propagation, we will implement it here.
3
Q2.2.1 Code [4 points] In python/nn.py, implement sigmoid, along with forward propagation for a single layer with an activation function, namely y = σ(XW + b), returning the
output and intermediate results for an N × D dimension input X, with examples along the
rows, data dimensions along the columns.
Q2.2.2 Code [3 points] In python/nn.py, implement the softmax function. Be sure to
use the numerical stability trick you derived in Q1.1 softmax.
Q2.2.3 Code [3 points] In python/nn.py, write a function to compute the accuracy of
a set of labels, along with the scalar loss across the data. The loss function generally used
for classification is the cross-entropy loss.
Lf(D) = −
X
(x,y)∈D
y · log(f(x))
Here D is the full training dataset of data samples x (N × 1 vectors, N = dimensionality of
data) and labels y (C × 1 one-hot vectors, C = number of classes).
2.3 Backwards Propagation
Q2.3.1 Code [7 points] In python/nn.py, write a function to compute backpropogation
for a single layer, given the original weights, the appropriate intermediate results, and given
gradient with respect to the loss. You should return the gradient with respect to X so you
can feed it into the next layer. As a size check, your gradients should be the same dimensions
as the original objects.
2.4 Training Loop
You will tend to see gradient descent in three forms: “normal”, “stochastic” and “batch”.
“Normal” gradient descent aggregates the updates for the entire dataset before changing the
weights. Stochastic gradient descent applies updates after every single data example. Batch
gradient descent is a compromise, where random subsets of the full dataset are evaluated
before applying the gradient update.
Q2.4 Code [5 points] In python/nn.py, write a function that takes the entire dataset
(x and y) as input, and then split the dataset into random batches. In python/run q2.py,
write a training loop that iterates over the random batches, does forward and backward
propagation, and applies a gradient update step.
2.5 Numerical Gradient Checker
Q2.5 [5 points] In python/run q2.py, implement a numerical gradient checker. Instead
of using the analytical gradients computed from the chain rule, add offset to each element in
the weights, and compute the numerical gradient of the loss with central differences. Central
differences is just f(x+)−f(x−)
2
. Remember, this needs to be done for each scalar dimension
in all of your weights independently.
4
3 Training Models
First, be sure to run the script, from inside the scripts folder, get data.sh. This will use
wget and unzip to download
http://www.cs.cmu.edu/~lkeselma/16720a_data/data.zip
http://www.cs.cmu.edu/~lkeselma/16720a_data/images.zip
and extract them to data and image folders. (For those who are on operating systems like
Windows and cannot run the scipt, you can also manually download and unzip the data.)
Since our input images are 32 × 32 images, unrolled into one 1024 dimensional vector, that
gets multiplied by W(1), each row of W(1) can be seen as a weight image. Reshaping each
row into a 32×32 image can give us an idea of what types of images each unit in the hidden
layer has a high response to.
We have provided you three data .mat files to use for this section. The training data in
nist36 train.mat contains samples for each of the 26 upper-case letters of the alphabet
and the 10 digits. This is the set you should use for training your network. The crossvalidation set in nist36 valid.mat contains samples from each class, and should be used
in the training loop to see how the network is performing on data that it is not training
on. This will help to spot over fitting. Finally, the test data in nist36 test.mat contains
testing data, and should be used for the final evaluation on your best model to see how well
it will generalize to new unseen data.
Use python/run q3.py for this question, and refer to the comments for what to implement.
Q3.1 Code [5 points] Train a network from scratch. Use a single hidden layer with 64
hidden units, and train for at least 30 epochs. Modify the script to generate two plots: one
showing the accuracy on both the training and validation set over the epochs, and the other
showing the cross-entropy loss averaged over the data. The x-axis should represent the epoch
number, while the y-axis represents the accuracy or loss. With these settings, you should
see an accuracy on the validation set of at least 75%.
Q3.2 Writeup [3 points] Use your modified training script to train three networks, one
with your best learning rate, one with 10 times that learning rate and one with one tenth
that learning rate. Include all 4 plots in your writeup. Comment on how the learning rates
affect the training, and report the final accuracy of the best network on the test set.
Q3.3 Writeup [3 points] Visualize the first layer weights that your network learned
(using reshape and ImageGrid). Compare these to the network weights immediately after
initialization. Include both visualizations in your writeup. Comment on the learned weights.
Do you notice any patterns?
Q3.4 Writeup [3 points] Visualize the confusion matrix for your best model. Comment
on the top few pairs of classes that are most commonly confused.
5
4 Extract Text from Images
Figure 1: Sample image with handwritten characters annotated with boxes around each
character.
Now that you have a network that can recognize handwritten letters with reasonable accuracy, you can now use it to parse text in an image. Given an image with some text on it,
our goal is to have a function that returns the actual text in the image. However, since your
neural network expects a a binary image with a single character, you will need to process
the input image to extract each character. There are various approaches that can be done
so feel free to use any strategy you like.
Here we outline one possible method, another is that given in a tutorial
1. Process the image (blur, threshold, opening morphology, etc. (perhaps in that order))
to classify all pixels as being part of a character or background.
2. Find connected groups of character pixels (see skimage.measure.label). Place a bounding box around each connected component.
3. Group the letters based on which line of the text they are a part of, and sort each
group so that the letters are in the order they appear on the page.
4. Take each bounding box one at a time and resize it to 32 × 32, classify it with your
network, and report the characters in order (inserting spaces when it makes sense).
Since the network you trained likely does not have perfect accuracy, you can expect there
to be some errors in your final text parsing. Whichever method you choose to implement
for the character detection, you should be able to place a box on most of there characters in
the image. We have provided you with 01 list.jpg, 02 letters.jpg, 03 haiku.jpg and
04 deep.jpg to test your implementation on.
6
Q4.1 Theory [3 points] The method outlined above is pretty simplistic, and makes
several assumptions. What are two big assumptions that the sample method makes. In your
writeup, include two example images where you expect the character detection to fail (either
miss valid letters, or respond to non-letters).
Q4.2 Code [10 points] In python/q4.py, implement the function to find letters in the
image. Given an RGB image, this function should return bounding boxes for all of the
located handwritten characters in the image, as well as a binary black-and-white version of
the image im. Each row of the matrix should contain [y1,x1,y2,x2] the positions of the
top-left and bottom-right corners of the box. The black and white image should be floating
point, 0 to 1, with the characters in black and background in white.
Q4.3 Writeup [5 points] Run findLetters(..) on all of the provided sample images
in images/. Plot all of the located boxes on top of the image to show the accuracy of your
findLetters(..) function. Include all the result images in your writeup.
Q4.4 Code/Writeup [8 points] Use python/run q4.py for this question. Now you will
load the image, find the character locations, classify each one with the network you trained
in Q3.1, and return the text contained in the image. Be sure you try to make your detected
images look like the images from the training set. Visualize them and act accordingly.
Run your run q4 on all of the provided sample images in images/. Include the extracted
text in your writeup.
7
5 Image Compression with Autoencoders
An autoencoder is a neural network that is trained to attempt to copy its input to its output,
but it usually allows copying only approximately. This is typically achieved by restricting
the number of hidden nodes inside the autoencoder; in other words, the autoencoder would
be forced to learn to represent data with this limited number of hidden nodes. This is a
useful way of learning compressed representations. In this section, we will continue using
the NIST36 dataset you have from the previous questions. Use python/run q5.py for this
question.
5.1 Building the Autoencoder
Q5.1.1 Code [5 points] Due to the difficulty in training auto-encoders, we have to move
to the relu(x) = max(x, 0) activation function. It is provided for you in util.py. Implement
a 2 hidden layer autoencoder where the layers are
• 1024 to 32 dimensions, followed by a ReLU
• 32 to 32 dimensions, followed by a ReLU
• 32 to 32 dimensions, followed by a ReLU
• 32 to 1024 dimensions, followed by a sigmoid (this normalizes the image output for us)
The loss function that you’re using is total squared error for the output image compared to
the input image (they should be the same!).
Q5.1.2 Code [5 points] To help even more with convergence speed, we will implement
momentum. Now, instead of updating W = W − α
∂J
∂W , we will use the update rules MW =
0.9MW − α
∂J
∂W and W = W + MW . To implement this, populate the parameters dictionary
with zero-initialized momentum accumulators, one for each parameter. Then simply perform
both update equations for every batch.
5.2 Training the Autoencoder
Q5.2 Writeup/Code [5 points] Using the provided default settings, train the network
for 100 epochs. What do you observe in the plotted training loss curve as it progresses?
5.3 Evaluating the Autoencoder
Q5.3.1 Writeup/Code [5 points] Now let’s evaluate how well the autoencoder has been
trained. Select 5 classes from the total 36 classes in the validation set and for each selected
class include in your report 2 validation images and their reconstruction. What differences
do you observe that exist in the reconstructed validation images, compared to the original
ones?
8 16720-A
Q5.3.2 Writeup [5 points] Let’s evaluate the reconstruction quality using Peak Signalto-noise Ratio (PSNR). PSNR is defined as
PSNR = 20 × log10(MAXI ) − 10 × log10(MSE) (1)
where MAXI is the maximum possible pixel value of the image, and MSE (mean squared
error) is computed across all pixels. You may use skimage.measure.compare psnr for convenience. Report the average PSNR you get from the autoencoder across all images in the
validation set.
9 16720-A
6 PyTorch (Extra Credit)
While you were able to derive manual backpropogation rules for sigmoid and fully-connected
layers, wouldn’t it be nice if someone did that for lots of useful primatives and made it fast
and easy to use for general computation? Meet automatic differentiation. Since we have
high-dimensional inputs (images) and low-dimensional outputs (a scalar loss), it turns out
forward mode AD is very efficient. Popular autodiff packages include pytorch (Facebook),
tensorflow (Google), autograd (Boston-area academics). Autograd provides its own replacement for numpy operators and is a drop-in replacement for numpy, except you can ask for
gradients now. The other two are able to utilize GPUs to perform highly optimized and
parallel computations, and are very popular for researchers who train large networks. Tensorflow asks you to build a computational graph using its API, and then is able to pass
data through that graph. PyTorch builds a dynamic graph and allows you to mix autograd
functions with normal python code much more smoothly, so it is currently more popular in
academia.
For extra credit, we will use PyTorch as a framework. Many computer vision projects
use neural networks as a basic building block, so familiarity with one of these frameworks
is a good skill to develop. Here, we basically replicate and slightly expand our handwritten
character recognition networks, but do it in PyTorch instead of doing it ourselves. Feel free
to use any tutorial you like, but we like the offical one or this tutorial (in a jupyter notebook)
or these slides (starting from number 35).
For this section, you’re free to implement these however you like. All of the
tasks required here are fairly small and don’t require a GPU if you use small
networks. Create python scripts python/run q6 1.py and python/run q6 2.py, and
implement your code there correspondingly.
6.1 Train a neural network in PyTorch
Q6.1.1 Code/Writeup [5 points] Re-write and re-train your fully-connected network
on the included NIST36 in PyTorch. Plot training accuracy and loss over time.
Q6.1.2 Code/Writeup [5 points] Train a convolutional neural network with PyTorch
on the included NIST36 dataset. Compare its performance with the previous fully-connected
network.
Q6.1.3 Code/Writeup [5 points] Train a convolutional neural network with PyTorch on
CIFAR-10 (torchvision.datasets.CIFAR10). Plot training accuracy and loss over time.
Q6.1.4 Code/Writeup [10 points] In Homework 1, we tried scene classification with
the bag-of-words (BoW) approach on a subset of the SUN database. Use the same dataset in
HW1, and implement a convolutional neural network with PyTorch for scene classification.
Compare your result with the one you got in HW1, and briefly comment on it.
10
6.2 Fine Tuning
When training from scratch, a lot of epochs and data are often needed to learn anything
meaningful. One way to avoid this is to instead initialize the weights more intelligently.
These days, it is most common to initialize a network with weights from another deep
network that was trained for a different purpose. This is because, whether we are doing image
classification, segmentation, recognition etc…, most real images share common properties.
Simply copying the weights from the other network to yours gives your network a head start,
so your network does not need to learn these common weights from scratch all over again.
This is also referred to as fine tuning.
Q6.2.1 Code/Writeup [5 points] Fine-tune a single layer classifier using pytorch on the
flowers 17 (or flowers 102!) dataset using squeezenet1 1, as well as an architecture you’ve
designed yourself (3 conv layers, followed 2 fc layers, it’s standard slide 6) and trained from
scratch. How do they compare?
We include a script in scripts/ to fetch the flowers dataset and extract it in a way that
PyTorch ImageFolder can consume it, see an example, from data/oxford-flowers17. You
should look at how SqueezeNet is defined, and just replace the classifier layer. There exists
a pretty good example for fine-tuning in PyTorch.
7 Deliverables
The assignment should be submitted to canvas. The writeup should be submitted as a pdf
named .pdf. The code should be submitted as a zip named .zip.
The zip when uncompressed should produce the following files.
• nn.py
• q4.py
• run q2.py
• run q3.py
• run q4.py
• run q5.py
• run q6.py (extra credit)
• util.py
11
References
[1] Xavier Glorot and Yoshua Bengio. Understanding the difficulty of training deep
feedforward neural networks. 2010. http://proceedings.mlr.press/v9/glorot10a/
glorot10a.pdf.
[2] P. J. Grother. Nist special database 19 – handprinted forms and characters database.
https://www.nist.gov/srd/nist-special-database-19, 1995.
12
8 Appendix: Neural Network Overview
Deep learning has quickly become one of the most applied machine learning techniques in
computer vision. Convolutional neural networks have been applied to many different computer vision problems such as image classification, recognition, and segmentation with great
success. In this assignment, you will first implement a fully connected feed forward neural
network for hand written character classification. Then in the second part, you will implement a system to locate characters in an image, which you can then classify with your deep
network. The end result will be a system that, given an image of hand written text, will
output the text contained in the image.
8.1 Basic Use
Here we will give a brief overview of the math for a single hidden layer feed forward network.
For a more detailed look at the math and derivation, please see the class slides.
A fully-connected network f, for classification, applies a series of linear and non-linear
functions to an input data vector x of size N × 1 to produce an output vector f(x) of size
C ×1, where each element i of the output vector represents the probability of x belonging to
the class i. Since the data samples are of dimensionality N, this means the input layer has
N input units. To compute the value of the output units, we must first compute the values
of all the hidden layers. The first hidden layer pre-activation a
(1)(x) is given by
a
(1)(x) = W(1)x + b
(1)
Then the post-activation values of the first hidden layer h
(1)(x) are computed by applying a
non-linear activation function g to the pre-activation values
h
(1)(x) = g(a
(1)(x)) = g(W(1)x + b
(1))
Subsequent hidden layer (1 < t ≤ T) pre- and post activations are given by:
a
(t)
(x) = W(t)h
(t−1) + b
(t)
h
(t)
(x) = g(a
(t)
(x))
The output layer pre-activations a
(T)
(x) are computed in a similar way
a
(T)
(x) = W(T)h
(T −1)(x) + b
(T)
and finally the post-activation values of the output layer are computed with
f(x) = o(a
(T)
(x)) = o(W(T)h
(T −1)(x) + b
(T)
)
where o is the output activation function. Please note the difference between g and o! For
this assignment, we will be using the sigmoid activation function for the hidden layer, so:
g(y) = 1
1 + exp(−y)
13
Figure 2: Samples from NIST Special 19 dataset [2]
where when g is applied to a vector, it is applied element wise across the vector.
Since we are using this deep network for classification, a common output activation function
to use is the softmax function. This will allow us to turn the real value, possibly negative
values of a
(T)
(x) into a set of probabilities (vector of positive numbers that sum to 1). Letting
xi denote the i
th element of the vector x, the softmax function is defined as:
oi(y) = exp(yi)
P
j
exp(yj )
Gradient descent is an iterative optimisation algorithm, used to find the local optima. To
find the local minima, we start at a point on the function and move in the direction of
negative gradient (steepest descent) till some stopping criteria is met.
8.2 Backprop
The update equation for a general weight W
(t)
ij and bias b
(t)
i
is
W
(t)
ij = W
(t)
ij − α ∗
∂Lf
∂W(t)
ij
(x) b
(t)
i = b
(t)
i − α ∗
∂Lf
∂b(t)
i
(x)
α is the learning rate. Please refer to the backpropagation slides for more details on how to
derive the gradients. Note that here we are using softmax loss (which is different from the
least square loss in the slides).
14
