Description
Problem 1
In this problem, we are going to use the tool, strace, to track system calls invoked while another system tool, cat, is
executed, where “cat” is a program that can be used to print the content of files to the screen. A sample file is
provided.
Please use the following command to redirect and save the output:
“strace -o strace_result cat sample_file”
Read the strace_result file and answer the following questions:
1. Among all the system calls invoked, which ones read data from the file (i.e., sample_file) and which ones
write data to the output screen device? Show the system calls from the strace_result file, and please include
the parameters.
2. For the system calls identified in subproblem (1), what are the corresponding files of the file descriptors
appearing in these system calls? Note that stdout and stderr are legit possible answers. If you need help on
understanding what is a file descriptor, check this wiki page. Make your best guess.
3. How would you use the strace tool to determine the values of file descriptors for stdout and stderr?
Put your answers in problems.txt (ASCII file).
Problem 2
For this question, read the manual pages for fork() and waitpid() carefully. To read the manual page for a particular
command, function, or system call, you can usually just type “man command/fuction/system_call”. If two different
manual pages have the same name, you can specify the section of the manual to make sure you get the page you
want. For example, “man 1 stat” will give you documentation for the stat shell command, and “man 2 stat” will tell
you about the stat() system call. For fork and waitpid, “man fork” and “man waitpid” are suffice. You can certainly
search the internet, as manual pages are also stored by many different sites. It is just that typing commands in a
terminal can get you comfortable with the terminal quicker, as you will be using it a lot throughout the semester.
Consider a child process ProcC created by process ProcP using fork(). ProcP waits for ProcC using waitpid() after
ProcC is created, assuming ProcC exits after ProcP calls waitpid(). Initially, ProcP has opened one file, f1, with
“rw” access using open(). After ProcC exits, ProcP closes the file and exits. Answer the questions based on the
information in the manual pages, and the manual pages should have all the information you need.
1. Can ProcC access the file opened by ProcP? Please reference necessary sentences from the manual pages that
can support your answer.
2. Suppose ProcP writes some data D1 on f1 before creating ProcC and some data D2 after creating ProcC.
Which data will be visible to ProcC and why? Can ProcC write anything on f1? Please reference necessary
sentences from the manual pages that can support your answer.
3. What will happen to ProcC if ProcP does not wait on ProcC? Can ProcP wait on ProcC after ProcC has
exited? What happens if ProcP exits as well without waiting on ProcC at all? Please reference necessary
sentences from the manual pages that can support your answer.
4. How can ProcP check the return value of ProcC? Please reference necessary sentences from the manual pages
that can support your answer.
Put your answers in problems.txt (ASCII file).
CSC 246
Problem 3
In this problem, you are asked to implement a mini shell program, through which external programs can be
executed from command lines. As shells you are using on Linux, our mini shell first parses each user command,
and it then executes each command in a separate process. However, being a mini shell, it will be less sophisticated,
and there is no need to support features like input/output redirection, pipes, or background execution. Completing
this project will involve using the fork(), execlp(), and waitpid() system calls. Note that we are specifically
requiring the use of execlp() among the exec system function family.
The Core
A shell interface gives the user a prompt (“> ” in our case), after which the next command is entered. One
technique for implementing a shell interface is to have the parent process first read what the user enters on the
command line and then create a separate child process that performs the command. This will require parsing what
the user has entered into separate tokens and storing the tokens in an array of character strings. For example, if a
user enters the command “ls -al”, the values stored in the array are: “ls”, “-al”, and NULL. This args array will be
used by the execlp() function, and please check the manual page to learn how to use the function.
You are required to have the parent process wait and track the child process’s return status using waitpid() system
call, see the WIFEXITED() and WEXITSTATUS() macros (read the man pages for their detailed usage). For other
error conditions that you catch and handle, print out error messages using your own format. The mini shell exits on
the “exit” command.
Aliases
You are also asked to allow users to add their own command names as aliases. Here is an example: normally, one
types “ls -al” to show the extended information of all files in the current directory. If you type “alias ll ls -al” in the
mini shell, it will establish an alias “ll” for “ls -al”. The next time when you enter “ll”, you will get the same results
as typing “ls -al”.
The maximum alias table entry number is required to be 8, which excludes duplicated entries. If the command is
“alias” without extra arguments, please show all the aliases stored in the alias table. An “alias” with one argument
just prints the matching alias stored in the table, or an error message if it does not exist.
The maximum number of arguments for execlp() should be 6, which includes the program name and the last
argument NULL (should be used as the last argument). Your alias should take care of partial replacement cases of
arguments, for example:
> alias
>
The command now is actually instead of only .
You can first parse your command and check if it is an alias command starting with the string “alias”. If it is an
alias command with no argument, print all aliases; if it is an alias command with one argument, print the matching
alias; and if it has two or more arguments, create a new alias if the alias is not taken yet. If it is not an alias
CSC 246 Spring 2019 Homework 1 1/23/19, 7)55 PM
https://people.engr.ncsu.edu/gjin2/Classes/246/Spring2019/hw/hw1/index.html Page 4 of 5
command, you first try to determine if it is a match of any command with aliases defined. Upon a match, the mini
shell expands the command accordingly. Finally, the mini shell uses fork() and execlp() to execute the command.
sample test cases:
./prob_3
> alias ll ls -al
> ll
drwx—— 2 user ncsu 2048 Aug 26 11:47 .
drwx—— 5 user ncsu 2048 Aug 26 01:43 ..
-rw——- 1 user ncsu 353 Aug 26 09:16 Makefile
-rwx—— 1 user ncsu 14027 Aug 26 09:41 prob_3
-rw——- 1 user ncsu 5343 Aug 26 09:42 prob_3.c
> alias c cat
> c Makefile
# the compiler: gcc for C program, define as g++ for C++
CC = gcc
RM = rm
# compiler flags:
# -lm for utilizing math.h
# -I Include path
CFLAGS = -lm
IFLAGS = -I
# the build target executable:
EXECUTABLE = prob_3
all: $(EXECUTABLE)
$(EXECUTABLE): $(EXECUTABLE).c
$(CC) -o $(EXECUTABLE) $(CFLAGS) $(EXECUTABLE).c
clean:
$(RM) $(EXECUTABLE)
> alias
ll ls -al (null)
c cat (null)
> alias ll
ll ls -al (null)
> alias mm
ERROR: no such alias
> c
cat: : No such file or directory
ERROR: cat return 1
> cat
cat: : No such file or directory
ERROR: cat return 1
> exit
CSC 246 Spring 2019 Homework 1 1/23/19, 7)55 PM
https://people.engr.ncsu.edu/gjin2/Classes/246/Spring2019/hw/hw1/index.html Page 5 of 5
Miscellaneous
If the input only includes spaces, tabs, or Enters, your terminal should not terminate or crash.
You are given a programming skeleton prob_3.c with parsing code, which you do not need to follow. If you decide
to follow, there could lines that need to be modified based on the specification above. The skeleton also provides
the general operations of a command-line shell. The main() function presents the prompt “> ” and outlines the steps
to be taken after input from the user has been read. The main() function continually loops until the user enters exit
at the prompt.
A sample Makefile is provided, under which you can do “make” (equivalent to “make all”), “make prob_3”, and
“make clean”. After you finish, turn in your source files, Makefile, and README.
CSC 246